Spirirts of the West Dream Catcher Fighting Stallions Yard Art Large Scrap Art Yard Art Recycled Art Rusty Metal
"Spirits of the West " is made completely of recycled materials .The base is made of the spokes that I cut out of the large ring and the pivot pin is an old shaft out of a piece of farm equipment .The outside ring is a the side of a gas line spool and is square tubing 1 1/4 " wide by 84" in diameter with a piece of 1 1/4 " diameter pipe welded to it with 1/8 thick gussets .The inner ring is a 54 " diameter by 1 3/4 " wide wagon rim and the chain that the stallions are lashed in with is old tire chains welded together . The stallions are a piece of 1/4 " steel plate that was left after I cut the stallions out of ( I did lay them out strategically so I could use it for a later project ) .The feathers are cut out of the side of bowling pinsetter .The outer ring pivots on the base and the inner ring pivots on the chain that it is suspended from. It is 8 ft 2 inches tall ,7ft wide and the base is 4ft in diameter. " Thanks For Looking "